psig

psig什么意思,psig翻译

基本解释

n.: 每平方英寸表压磅；计示压强磅/平方英寸；磅/平方时表压
网络: 压力；压力表读数；磅英寸表压

英汉解释

• 磅/平方时表压

• 计示压强磅/平方英寸

• 每平方英寸表压磅

例句

• Thrust requirements up to 25, 000 Ibs. can be accommodated with standard bore size cylinders assuming minimum 80 PSIG field air supply.

  大于25,000磅的推力要求可以通过配置标准镗孔的缸体执行机构来实现，在此假定现场气源压力最小为80PSIG。

• This plug of extruded elastomer can BE lodged in the throat so tightly that even 2000 psig of pressure will not dislodge it.

  突出的人造橡胶会紧紧的堵在喉管处，即使2000psig的压力也不能把它移走。

• before and after use. During idle periods, systems should be maintained under pressure with approximately 10 psig of dry inert gas.

  在空闲时间里，应该在10psig的压力下用干燥的惰性气体来维护系统。

• These containers operate at pressures up to 350 psig and have capacities between 80 and 450 liters of liquid.

  这些容器可以在压力小于350psig的情况下工作，容积在80到450升液体之间。

• They are also used in conjunction with high-pressure cylinder regulators that limit the inlet pressure to 250 to 400 psig.

  它们还和把入口压力限制在250到400psig之间的高压钢瓶调整器联合使用。

• Pressures above 500 psig may cause the fusible alloy to extrude and eventually release the product.

  psig以上的压力会使易熔合金变形和最终释放出产品。

• The first stage reduces inlet pressure to a preset intermediate pressure, typically 350 to 500 psig.

  第一级把入口的压力降到预定的中间压力，该压力典型值为350到500psig。

• These devices are not suitable for service pressures exceeding 500 psig.

  这些装置不适用于超过500psig的工作压力。

• Pressures above 500 psig may cause the fusiblealloy to extrude and eventually release the product.

  500psig以上的压力会使易熔合金变形和最终开释出产品。

• Standard pressure settings FOR saturated steam service are 5 through 15 psig.

  对于饱和蒸汽系统来说，标准的压力设置是5至15psig。