ovality

ovality什么意思,ovality翻译

基本解释

n.: 〔工〕椭圆度
网络: 卵形度；不圆度；最大椭圆度

英汉解释

• 〔工〕椭圆度,卵形度

例句

• Acceptable ovality for refractory performance is derived empirically from many years of observation.

  对耐火砖衬可接受的椭圆度只可来通过多年观察得来经验取得。

• The bended part of a tube has the ovality less than 2%, smooth inside wall without folding and even outside wall thickness without crack.

  弯管部位管材的椭圆度小于2%，内壁光滑无皱褶，外部壁厚均匀无开裂。

• The errors of the stand-off measurement and measurement errors made by pitch diameter gauge and ovality gauge are analyzed and compared.

  分析比较了紧密距测量以及中径和椭圆度量规测量的误差。

• Casing, cement and formation plane strain mechanical model are established, considering casing with initial ovality .

  针对套管的不同初始椭圆度建立了套管、水泥环、地层平面应变力学模型。

• Ovalisation meters measuring ovality during the test were used in the full scale testing, however.

  在该测试中用于测量椭圆度的成椭圆形仪表也可用于大型的测试，但是。

• Lacking internal support in the pipe, this pipe bending process creates some cross section ovality.

  在管道内支持不足，这根管子弯过程中创造一些截面椭圆。

• Preparing the ovality analysis: measuring the temperature of kiln shell and tyre, resp.

  椭圆度测量的准备工作：测量相应的窑筒体和轮带温度。

• The cross-section distortion of bent tube is very small by using ball filler push bending process, with the ovality less than 1. 5%.

  运用珠粒填料推弯成形工艺成形出的管材截面畸变程度很小，椭圆度不超过1.

• After rolling, welding and heat-treatment, the pipe may have some defaults, such as out-of- straightness and ovality .

  经过轧制、焊接和热处理后，钢管存在轴线方向弯曲和横截面椭圆度的缺陷。

• Feasibility Analysis of Substituting Pitch Diameter Gauge and Ovality Gauge for Thread Work Gauge

  用中径和椭圆度量规替代螺纹工作量规的可行性分析