Dear Everyone
我是个纯新手哦，但是遇到了很奇妙的问题，描述如下：
硬盘安装好了之后，一进系统插上网线，刚想设置，发现右上角那是个叉：
[attach]38948[/attach]
点进去后是这样的：
[attach]38949[/attach]
这是否说明，系统直接没有认出我的以太网卡。。
各种搜索之后，据说要用server network restart
但我不能使用，如图：
[attach]38950[/attach]
这种情况还有人遇到吗？
我进入网络设置后，如下图：
[attach]38951[/attach]
如果添加了一个连接后，注销后打开终端输入ifconfig也出来的是错的：
[attach]38952[/attach]
是不是还要设置什么东西，还是我漏了什么，我这根线在WIN7下肯定是好的，唉，麻烦诸位了，没有任何头绪，想做任何事都得有个网啊。。。
alick 于 2012-09-17 18:51:35发表:
15# jessiehe1986
有可能驱动还不好，也有可能简单的是网络质量不好
jessiehe1986 于 2012-09-17 07:40:37发表:
谢谢了，无线上网总算是搞定了，但是网速显示不是很快，是否是不很兼容的缘故？
PS：早知道不买这么高配的机器了。。
alick 于 2012-09-16 22:47:38发表:
显卡驱动问题可以看本版FAQ：//m.ajphoenix.com/bbs/thread-182725-1-1.html
jessiehe1986 于 2012-09-16 20:26:09发表:
<-Nvidia显卡的芯片组不被开源驱动nouveau支持
额，显卡驱动我已经准备好了。。，是从官网下载的gtx660m for Linux 64bit的， 我禁用了nouveau的再安装官网的这个显卡驱动应该能使用的吧。
PM:早知道不买这么高端的机器了。。
alick 于 2012-09-16 20:11:04发表:
我想，到 Fedora 18 的时候，这两个网卡的问题估计就都不会发生了。不过这对于目前解决问题没有帮助，抱歉……
可以尝试在 Fedora 17 上解决（按照上面的方法），但需要一些努力。
也许，试试更新一点的发行版，比如 ArchLinux 最近的 ISO，有可能至少无线网卡能用。
再或者，换个电脑试试。。。
alick 于 2012-09-16 20:06:51发表:
这是以太网卡的信息，1969:1091 即指的是 AR8161 这个型号的有线网卡[1]。8月15号才有相关代码提交到kernel。[2]目前并没有发行版打包了它。可以参考[3][4]去编译安装它，不过这个可能并不容易。
[1] http://www.linuxfoundation.org/collaborate/workgroups/networking/alx
[2] http://comments.gmane.org/gmane.linux.kernel/1343369
[3] http://ask.fedoraproject.org/question/2010/no-ethernet-connection-with-fedora17-atheros-card
[4] https://bugzilla.redhat.com/show_bug.cgi?id=842367
alick 于 2012-09-16 19:45:07发表:
[i=s] 本帖最后由 alick 于 2012-9-16 19:47 编辑 [/i]
看起来你不太走运，这个型号的笔记本的配件对linux不够友好～～～
无线缺少 firmware 故无法使用。安装 iwl2000-firmware 软件包，重启后应该就好：
先找到软件包，例如这里下载[code]http://mirrors.sohu.com/fedora/updates/17/x86_64/iwl2000-firmware-18.168.6.1-9.fc17.noarch.rpm[/code]然后安装[code]
rpm -ivh iwl2000-firmware-*
reboot[/code] Nvidia显卡的芯片组不被开源驱动nouveau支持，sigh
jessiehe1986 于 2012-09-16 06:47:49发表:
多谢版主，以下为信息：
at 0
------------------------第一个命令的输出---------------------------
[jessie@Cetex ~]$ for BUSID in $(/sbin/lspci | awk '{IGNORECASE=1}/net/ {print $1}');do /sbin/lspci -s $BUSID -knn; done
02:00.0 Ethernet controller [0200]: Atheros Communications Device [1969:1091] (rev 08)
Subsystem: Lenovo Device [17aa:3979]
03:00.0 Network controller [0280]: Intel Corporation Device [8086:0891] (rev c4)
Subsystem: Intel Corporation Device [8086:4222]
-------------------------------------------------------------------------------------------------------------
------------------------第二个命令的输出---------------------------
[ 0.000000] Initializing cgroup subsys cpuset
[ 0.000000] Initializing cgroup subsys cpu
[ 0.000000] Linux version 3.3.4-5.fc17.x86_64 (mockbuild@x86-14.phx2.fedoraproject.org) (gcc version 4.7.0 20120504 (Red Hat 4.7.0-4) (GCC) ) #1 SMP Mon May 7 17:29:34 UTC 2012
[ 0.000000] Command line: BOOT_IMAGE=/vmlinuz-3.3.4-5.fc17.x86_64 root=UUID=ca374d0e-5956-4e76-9320-f0ac33475354 ro SYSFONT=False rd.lvm=0 rd.dm=0 LANG=zh_CN.UTF-8 KEYTABLE=us rd.md=0 rd.luks=0 rhgb quiet
[ 0.000000] BIOS-provided physical RAM map:
[ 0.000000] BIOS-e820: 0000000000000000 - 000000000009d800 (usable)
[ 0.000000] BIOS-e820: 000000000009d800 - 00000000000a0000 (reserved)
[ 0.000000] BIOS-e820: 00000000000e0000 - 0000000000100000 (reserved)
[ 0.000000] BIOS-e820: 0000000000100000 - 0000000020000000 (usable)
[ 0.000000] BIOS-e820: 0000000020000000 - 0000000020200000 (reserved)
[ 0.000000] BIOS-e820: 0000000020200000 - 0000000040004000 (usable)
[ 0.000000] BIOS-e820: 0000000040004000 - 0000000040005000 (reserved)
[ 0.000000] BIOS-e820: 0000000040005000 - 00000000baabf000 (usable)
[ 0.000000] BIOS-e820: 00000000baabf000 - 00000000baebf000 (reserved)
[ 0.000000] BIOS-e820: 00000000baebf000 - 00000000bafbf000 (ACPI NVS)
[ 0.000000] BIOS-e820: 00000000bafbf000 - 00000000bafff000 (ACPI data)
[ 0.000000] BIOS-e820: 00000000bafff000 - 00000000bb000000 (usable)
[ 0.000000] BIOS-e820: 00000000bb000000 - 00000000bfa00000 (reserved)
[ 0.000000] BIOS-e820: 00000000f0000000 - 00000000f4000000 (reserved)
[ 0.000000] BIOS-e820: 00000000feb00000 - 00000000feb04000 (reserved)
[ 0.000000] BIOS-e820: 00000000fec00000 - 00000000fec01000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed10000 - 00000000fed1a000 (reserved)
[ 0.000000] BIOS-e820: 00000000fed1c000 - 00000000fed20000 (reserved)
[ 0.000000] BIOS-e820: 00000000fee00000 - 00000000fee01000 (reserved)
[ 0.000000] BIOS-e820: 00000000ffb80000 - 0000000100000000 (reserved)
[ 0.000000] BIOS-e820: 0000000100000000 - 000000013f600000 (usable)
[ 0.000000] NX (Execute Disable) protection: active
[ 0.000000] DMI 2.7 present.
[ 0.000000] DMI: LENOVO Lenovo IdeaPad Y580/Product Name, BIOS 5DCN38WW(V2.05) 06/26/2012
[ 0.000000] e820 update range: 0000000000000000 - 0000000000010000 (usable) ==> (reserved)
[ 0.000000] e820 remove range: 00000000000a0000 - 0000000000100000 (usable)
[ 0.000000] No AGP bridge found
[ 0.000000] last_pfn = 0x13f600 max_arch_pfn = 0x400000000
[ 0.000000] MTRR default type: uncachable
[ 0.000000] MTRR fixed ranges enabled:
[ 0.000000] 00000-9FFFF write-back
[ 0.000000] A0000-BFFFF uncachable
[ 0.000000] C0000-E7FFF write-protect
[ 0.000000] E8000-EFFFF write-combining
[ 0.000000] F0000-FFFFF write-protect
[ 0.000000] MTRR variable ranges enabled:
[ 0.000000] 0 base 000000000 mask F80000000 write-back
[ 0.000000] 1 base 080000000 mask FC0000000 write-back
[ 0.000000] 2 base 0BB000000 mask FFF000000 uncachable
[ 0.000000] 3 base 0BC000000 mask FFC000000 uncachable
[ 0.000000] 4 base 0FFC00000 mask FFFC00000 write-protect
[ 0.000000] 5 base 100000000 mask FC0000000 write-back
[ 0.000000] 6 base 13F600000 mask FFFE00000 uncachable
[ 0.000000] 7 base 13F800000 mask FFF800000 uncachable
[ 0.000000] 8 disabled
[ 0.000000] 9 disabled
[ 0.000000] x86 PAT enabled: cpu 0, old 0x7040600070406, new 0x7010600070106
[ 0.000000] last_pfn = 0xbb000 max_arch_pfn = 0x400000000
[ 0.000000] found SMP MP-table at [ffff8800000fe1b0] fe1b0
[ 0.000000] initial memory mapped : 0 - 20000000
[ 0.000000] Base memory trampoline at [ffff880000098000] 98000 size 20480
[ 0.000000] init_memory_mapping: 0000000000000000-00000000bb000000
[ 0.000000] 0000000000 - 00bb000000 page 2M
[ 0.000000] kernel direct mapping tables up to bb000000 @ 1fffc000-20000000
[ 0.000000] init_memory_mapping: 0000000100000000-000000013f600000
[ 0.000000] 0100000000 - 013f600000 page 2M
[ 0.000000] kernel direct mapping tables up to 13f600000 @ baab9000-baabf000
[ 0.000000] RAMDISK: 3604c000 - 3701e000
[ 0.000000] ACPI: RSDP 00000000000fe020 00024 (v02 LENOVO)
[ 0.000000] ACPI: XSDT 00000000baffe210 00094 (v01 LENOVO CB-01 00000001 01000013)
[ 0.000000] ACPI: FACP 00000000baffb000 000F4 (v04 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: DSDT 00000000bafee000 09DCD (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FACS 00000000bafbb000 00040
[ 0.000000] ACPI: UEFI 00000000baffd000 00236 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASF! 00000000baffc000 000A5 (v32 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: HPET 00000000baffa000 00038 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: APIC 00000000baff9000 0008C (v02 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: MCFG 00000000baff8000 0003C (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SLIC 00000000bafed000 00176 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafec000 006FE (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: BOOT 00000000bafea000 00028 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: ASPT 00000000bafe5000 00034 (v07 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: FPDT 00000000bafe3000 00044 (v01 LENOVO CB-01 00000001 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafe2000 00968 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafe1000 00A92 (v01 LENOVO CB-01 00003000 ACPI 00040000)
[ 0.000000] ACPI: SSDT 00000000bafde000 02304 (v01 LENOVO CB-01 00001000 ACPI 00040000)
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] No NUMA configuration found
[ 0.000000] Faking a node at 0000000000000000-000000013f600000
[ 0.000000] Initmem setup node 0 0000000000000000-000000013f600000
[ 0.000000] NODE_DATA [000000013f5ec000 - 000000013f5fffff]
[ 0.000000] [ffffea0000000000-ffffea0004ffffff] PMD -> [ffff88013ac00000-ffff88013ebfffff] on node 0
[ 0.000000] Zone PFN ranges:
[ 0.000000] DMA 0x00000010 -> 0x00001000
[ 0.000000] DMA32 0x00001000 -> 0x00100000
[ 0.000000] Normal 0x00100000 -> 0x0013f600
[ 0.000000] Movable zone start PFN for each node
[ 0.000000] Early memory PFN ranges
[ 0.000000] 0: 0x00000010 -> 0x0000009d
[ 0.000000] 0: 0x00000100 -> 0x00020000
[ 0.000000] 0: 0x00020200 -> 0x00040004
[ 0.000000] 0: 0x00040005 -> 0x000baabf
[ 0.000000] 0: 0x000bafff -> 0x000bb000
[ 0.000000] 0: 0x00100000 -> 0x0013f600
[ 0.000000] On node 0 totalpages: 1023564
[ 0.000000] DMA zone: 64 pages used for memmap
[ 0.000000] DMA zone: 5 pages reserved
[ 0.000000] DMA zone: 3912 pages, LIFO batch:0
[ 0.000000] DMA32 zone: 16320 pages used for memmap
[ 0.000000] DMA32 zone: 743679 pages, LIFO batch:31
[ 0.000000] Normal zone: 4056 pages used for memmap
[ 0.000000] Normal zone: 255528 pages, LIFO batch:31
[ 0.000000] ACPI: PM-Timer IO Port: 0x408
[ 0.000000] ACPI: Local APIC address 0xfee00000
[ 0.000000] ACPI: LAPIC (acpi_id[0x01] lapic_id[0x00] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x02] lapic_id[0x01] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x03] lapic_id[0x02] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x04] lapic_id[0x03] enabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x05] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x06] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x07] lapic_id[0x00] disabled)
[ 0.000000] ACPI: LAPIC (acpi_id[0x08] lapic_id[0x00] disabled)
[ 0.000000] ACPI: IOAPIC (id[0x00] address[0xfec00000] gsi_base[0])
[ 0.000000] IOAPIC[0]: apic_id 0, version 32, address 0xfec00000, GSI 0-23
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 0 global_irq 2 dfl dfl)
[ 0.000000] ACPI: INT_SRC_OVR (bus 0 bus_irq 9 global_irq 9 high level)
[ 0.000000] ACPI: IRQ0 used by override.
[ 0.000000] ACPI: IRQ2 used by override.
[ 0.000000] ACPI: IRQ9 used by override.
[ 0.000000] Using ACPI (MADT) for SMP configuration information
[ 0.000000] ACPI: HPET id: 0x8086a201 base: 0xfed00000
[ 0.000000] SMP: Allowing 8 CPUs, 4 hotplug CPUs
[ 0.000000] nr_irqs_gsi: 40
[ 0.000000] PM: Registered nosave memory: 000000000009d000 - 000000000009e000
[ 0.000000] PM: Registered nosave memory: 000000000009e000 - 00000000000a0000
[ 0.000000] PM: Registered nosave memory: 00000000000a0000 - 00000000000e0000
[ 0.000000] PM: Registered nosave memory: 00000000000e0000 - 0000000000100000
[ 0.000000] PM: Registered nosave memory: 0000000020000000 - 0000000020200000
[ 0.000000] PM: Registered nosave memory: 0000000040004000 - 0000000040005000
[ 0.000000] PM: Registered nosave memory: 00000000baabf000 - 00000000baebf000
[ 0.000000] PM: Registered nosave memory: 00000000baebf000 - 00000000bafbf000
[ 0.000000] PM: Registered nosave memory: 00000000bafbf000 - 00000000bafff000
[ 0.000000] PM: Registered nosave memory: 00000000bb000000 - 00000000bfa00000
[ 0.000000] PM: Registered nosave memory: 00000000bfa00000 - 00000000f0000000
[ 0.000000] PM: Registered nosave memory: 00000000f0000000 - 00000000f4000000
[ 0.000000] PM: Registered nosave memory: 00000000f4000000 - 00000000feb00000
[ 0.000000] PM: Registered nosave memory: 00000000feb00000 - 00000000feb04000
[ 0.000000] PM: Registered nosave memory: 00000000feb04000 - 00000000fec00000
[ 0.000000] PM: Registered nosave memory: 00000000fec00000 - 00000000fec01000
[ 0.000000] PM: Registered nosave memory: 00000000fec01000 - 00000000fed10000
[ 0.000000] PM: Registered nosave memory: 00000000fed10000 - 00000000fed1a000
[ 0.000000] PM: Registered nosave memory: 00000000fed1a000 - 00000000fed1c000
[ 0.000000] PM: Registered nosave memory: 00000000fed1c000 - 00000000fed20000
[ 0.000000] PM: Registered nosave memory: 00000000fed20000 - 00000000fee00000
[ 0.000000] PM: Registered nosave memory: 00000000fee00000 - 00000000fee01000
[ 0.000000] PM: Registered nosave memory: 00000000fee01000 - 00000000ffb80000
[ 0.000000] PM: Registered nosave memory: 00000000ffb80000 - 0000000100000000
[ 0.000000] Allocating PCI resources starting at bfa00000 (gap: bfa00000:30600000)
[ 0.000000] Booting paravirtualized kernel on bare hardware
[ 0.000000] setup_percpu: NR_CPUS:64 nr_cpumask_bits:64 nr_cpu_ids:8 nr_node_ids:1
[ 0.000000] PERCPU: Embedded 28 pages/cpu @ffff88013f200000 s82496 r8192 d24000 u262144
[ 0.000000] pcpu-alloc: s82496 r8192 d24000 u262144 alloc=1*2097152
[ 0.000000] pcpu-alloc: [0] 0 1 2 3 4 5 6 7
[ 0.000000] Built 1 zonelists in Node order, mobility grouping on. Total pages: 1003119
[ 0.000000] Policy zone: Normal
[ 0.000000] Kernel command line: BOOT_IMAGE=/vmlinuz-3.3.4-5.fc17.x86_64 root=UUID=ca374d0e-5956-4e76-9320-f0ac33475354 ro SYSFONT=False rd.lvm=0 rd.dm=0 LANG=zh_CN.UTF-8 KEYTABLE=us rd.md=0 rd.luks=0 rhgb quiet
[ 0.000000] PID hash table entries: 4096 (order: 3, 32768 bytes)
[ 0.000000] xsave/xrstor: enabled xstate_bv 0x7, cntxt size 0x340
[ 0.000000] Checking aperture...
[ 0.000000] No AGP bridge found
[ 0.000000] Memory: 3931492k/5232640k available (6110k kernel code, 1138384k absent, 162764k reserved, 4989k data, 1000k init)
[ 0.000000] SLUB: Genslabs=15, HWalign=64, Order=0-3, MinObjects=0, CPUs=8, Nodes=1
[ 0.000000] Hierarchical RCU implementation.
[ 0.000000] NR_IRQS:4352 nr_irqs:744 16
[ 0.000000] Console: colour dummy device 80x25
[ 0.000000] console [tty0] enabled
[ 0.000000] allocated 16777216 bytes of page_cgroup
[ 0.000000] please try 'cgroup_disable=memory' option if you don't want memory cgroups
[ 0.000000] hpet clockevent registered
[ 0.000000] Fast TSC calibration using PIT
[ 0.001000] Detected 2494.271 MHz processor.
[ 0.000002] Calibrating delay loop (skipped), value calculated using timer frequency.. 4988.54 BogoMIPS (lpj=2494271)
[ 0.000005] pid_max: default: 32768 minimum: 301
[ 0.000035] Security Framework initialized
[ 0.000041] SELinux: Initializing.
[ 0.000048] SELinux: Starting in permissive mode
[ 0.000432] Dentry cache hash table entries: 524288 (order: 10, 4194304 bytes)
[ 0.001484] Inode-cache hash table entries: 262144 (order: 9, 2097152 bytes)
[ 0.001916] Mount-cache hash table entries: 256
[ 0.002036] Initializing cgroup subsys cpuacct
[ 0.002038] Initializing cgroup subsys memory
[ 0.002047] Initializing cgroup subsys devices
[ 0.002049] Initializing cgroup subsys freezer
[ 0.002050] Initializing cgroup subsys net_cls
[ 0.002052] Initializing cgroup subsys blkio
[ 0.002056] Initializing cgroup subsys perf_event
[ 0.002081] CPU: Physical Processor ID: 0
[ 0.002082] CPU: Processor Core ID: 0
[ 0.002086] ENERGY_PERF_BIAS: Set to 'normal', was 'performance'
[ 0.002087] ENERGY_PERF_BIAS: View and update with x86_energy_perf_policy(8)
[ 0.002444] mce: CPU supports 7 MCE banks
[ 0.002455] CPU0: Thermal monitoring enabled (TM1)
[ 0.002460] using mwait in idle threads.
[ 0.003539] ACPI: Core revision 20120111
[ 0.023508] ftrace: allocating 22587 entries in 89 pages
[ 0.034798] ..TIMER: vector=0x30 apic1=0 pin1=2 apic2=-1 pin2=-1
[ 0.044787] CPU0: Intel(R) Core(TM) i5-3210M CPU @ 2.50GHz stepping 09
[ 0.145824] Performance Events: PEBS fmt1+, generic architected perfmon, Intel PMU driver.
[ 0.145829] ... version: 3
[ 0.145830] ... bit width: 48
[ 0.145831] ... generic registers: 4
[ 0.145832] ... value mask: 0000ffffffffffff
[ 0.145833] ... max period: 000000007fffffff
[ 0.145834] ... fixed-purpose events: 3
[ 0.145835] ... event mask: 000000070000000f
[ 0.145959] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.146022] Booting Node 0, Processors #1
[ 0.146024] smpboot cpu 1: start_ip = 98000
[ 0.177623] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.177696] #2
[ 0.177697] smpboot cpu 2: start_ip = 98000
[ 0.209090] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.209155] #3
[ 0.209156] smpboot cpu 3: start_ip = 98000
[ 0.240646] NMI watchdog enabled, takes one hw-pmu counter.
[ 0.240670] Brought up 4 CPUs
[ 0.240671] Total of 4 processors activated (19954.16 BogoMIPS).
[ 0.243778] devtmpfs: initialized
[ 0.243886] PM: Registering ACPI NVS region at baebf000 (1048576 bytes)
[ 0.244450] atomic64 test passed for x86-64 platform with CX8 and with SSE
[ 0.244478] RTC time: 20:03:36, date: 09/15/12
[ 0.244503] NET: Registered protocol family 16
[ 0.244610] ACPI FADT declares the system doesn't support PCIe ASPM, so disable it
[ 0.244613] ACPI: bus type pci registered
[ 0.244672] PCI: MMCONFIG for domain 0000 [bus 00-3f] at [mem 0xf0000000-0xf3ffffff] (base 0xf0000000)
[ 0.244675] PCI: MMCONFIG at [mem 0xf0000000-0xf3ffffff] reserved in E820
[ 0.256027] PCI: Using configuration type 1 for base access
[ 0.256072] mtrr: your CPUs had inconsistent variable MTRR settings
[ 0.256073] mtrr: probably your BIOS does not setup all CPUs.
[ 0.256074] mtrr: corrected configuration.
[ 0.256595] bio: create slab
[ 0.256644] ACPI: Added _OSI(Module Device)
[ 0.256646] ACPI: Added _OSI(Processor Device)
[ 0.256647] ACPI: Added _OSI(3.0 _SCP Extensions)
[ 0.256649] ACPI: Added _OSI(Processor Aggregator Device)
[ 0.257996] ACPI: EC: Look up EC in DSDT
[ 0.259354] ACPI: Executed 1 blocks of module-level executable AML code
[ 0.264792] [Firmware Bug]: ACPI: BIOS _OSI(Linux) query ignored
[ 0.265811] ACPI: SSDT 00000000babef018 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.266150] ACPI: Dynamic OEM Table Load:
[ 0.266153] ACPI: SSDT (null) 0083B (v01 PmRef Cpu0Cst 00003001 INTL 20100121)
[ 0.269889] ACPI: SSDT 00000000babf0a98 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.270249] ACPI: Dynamic OEM Table Load:
[ 0.270251] ACPI: SSDT (null) 00303 (v01 PmRef ApIst 00003000 INTL 20100121)
[ 0.272773] ACPI: SSDT 00000000babeed98 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.273105] ACPI: Dynamic OEM Table Load:
[ 0.273106] ACPI: SSDT (null) 00119 (v01 PmRef ApCst 00003000 INTL 20100121)
[ 0.276522] ACPI: Interpreter enabled
[ 0.276524] ACPI: (supports S0 S3 S4 S5)
[ 0.276544] ACPI: Using IOAPIC for interrupt routing
[ 0.399314] ACPI: EC: GPE = 0x17, I/O: command/status = 0x66, data = 0x62
[ 0.399478] ACPI: No dock devices found.
[ 0.399481] PCI: Using host bridge windows from ACPI; if necessary, use "pci=nocrs" and report a bug
[ 0.399744] \_SB_.PCI0:_OSC invalid UUID
[ 0.399745] _OSC request data:1 8 1f
[ 0.399748] ACPI: PCI Root Bridge [PCI0] (domain 0000 [bus 00-3e])
[ 0.400154] pci_root PNP0A08:00: host bridge window [io 0x0000-0x0cf7]
[ 0.400156] pci_root PNP0A08:00: host bridge window [io 0x0d00-0xffff]
[ 0.400158] pci_root PNP0A08:00: host bridge window [mem 0x000a0000-0x000bffff]
[ 0.400160] pci_root PNP0A08:00: host bridge window [mem 0xbfa00000-0xfeafffff]
[ 0.400184] PCI host bridge to bus 0000:00
[ 0.400186] pci_bus 0000:00: root bus resource [io 0x0000-0x0cf7]
[ 0.400187] pci_bus 0000:00: root bus resource [io 0x0d00-0xffff]
[ 0.400189] pci_bus 0000:00: root bus resource [mem 0x000a0000-0x000bffff]
[ 0.400190] pci_bus 0000:00: root bus resource [mem 0xbfa00000-0xfeafffff]
[ 0.400198] pci 0000:00:00.0: [8086:0154] type 0 class 0x000600
[ 0.400230] pci 0000:00:01.0: [8086:0151] type 1 class 0x000604
[ 0.400258] pci 0000:00:01.0: PME# supported from D0 D3hot D3cold
[ 0.400276] pci 0000:00:02.0: [8086:0166] type 0 class 0x000300
[ 0.400286] pci 0000:00:02.0: reg 10: [mem 0xd3000000-0xd33fffff 64bit]
[ 0.400294] pci 0000:00:02.0: reg 18: [mem 0xe0000000-0xefffffff 64bit pref]
[ 0.400299] pci 0000:00:02.0: reg 20: [io 0x4000-0x403f]
[ 0.400349] pci 0000:00:14.0: [8086:1e31] type 0 class 0x000c03
[ 0.400370] pci 0000:00:14.0: reg 10: [mem 0xd3700000-0xd370ffff 64bit]
[ 0.400440] pci 0000:00:14.0: PME# supported from D3hot D3cold
[ 0.400467] pci 0000:00:16.0: [8086:1e3a] type 0 class 0x000780
[ 0.400489] pci 0000:00:16.0: reg 10: [mem 0xd3714000-0xd371400f 64bit]
[ 0.400564] pci 0000:00:16.0: PME# supported from D0 D3hot D3cold
[ 0.400597] pci 0000:00:1a.0: [8086:1e2d] type 0 class 0x000c03
[ 0.400860] pci 0000:00:1a.0: reg 10: [mem 0xd3719000-0xd37193ff]
[ 0.402342] pci 0000:00:1a.0: PME# supported from D0 D3hot D3cold
[ 0.402370] pci 0000:00:1b.0: [8086:1e20] type 0 class 0x000403
[ 0.402386] pci 0000:00:1b.0: reg 10: [mem 0xd3710000-0xd3713fff 64bit]
[ 0.402453] pci 0000:00:1b.0: PME# supported from D0 D3hot D3cold
[ 0.402479] pci 0000:00:1c.0: [8086:1e10] type 1 class 0x000604
[ 0.402556] pci 0000:00:1c.0: PME# supported from D0 D3hot D3cold
[ 0.402582] pci 0000:00:1c.1: [8086:1e12] type 1 class 0x000604
[ 0.402659] pci 0000:00:1c.1: PME# supported from D0 D3hot D3cold
[ 0.402685] pci 0000:00:1c.3: [8086:1e16] type 1 class 0x000604
[ 0.402763] pci 0000:00:1c.3: PME# supported from D0 D3hot D3cold
[ 0.402796] pci 0000:00:1d.0: [8086:1e26] type 0 class 0x000c03
[ 0.403049] pci 0000:00:1d.0: reg 10: [mem 0xd3718000-0xd37183ff]
[ 0.404536] pci 0000:00:1d.0: PME# supported from D0 D3hot D3cold
[ 0.404563] pci 0000:00:1f.0: [8086:1e59] type 0 class 0x000601
[ 0.404686] pci 0000:00:1f.2: [8086:1e03] type 0 class 0x000106
[ 0.404704] pci 0000:00:1f.2: reg 10: [io 0x4088-0x408f]
[ 0.404712] pci 0000:00:1f.2: reg 14: [io 0x4094-0x4097]
[ 0.404720] pci 0000:00:1f.2: reg 18: [io 0x4080-0x4087]
[ 0.404728] pci 0000:00:1f.2: reg 1c: [io 0x4090-0x4093]
[ 0.404736] pci 0000:00:1f.2: reg 20: [io 0x4060-0x407f]
[ 0.404745] pci 0000:00:1f.2: reg 24: [mem 0xd3717000-0xd37177ff]
[ 0.404788] pci 0000:00:1f.2: PME# supported from D3hot
[ 0.404807] pci 0000:00:1f.3: [8086:1e22] type 0 class 0x000c05
[ 0.404822] pci 0000:00:1f.3: reg 10: [mem 0xd3715000-0xd37150ff 64bit]
[ 0.404843] pci 0000:00:1f.3: reg 20: [io 0x4040-0x405f]
[ 0.404901] pci 0000:01:00.0: [10de:0fd4] type 0 class 0x000300
[ 0.404913] pci 0000:01:00.0: reg 10: [mem 0xd2000000-0xd2ffffff]
[ 0.404925] pci 0000:01:00.0: reg 14: [mem 0xc0000000-0xcfffffff 64bit pref]
[ 0.404938] pci 0000:01:00.0: reg 1c: [mem 0xd0000000-0xd1ffffff 64bit pref]
[ 0.404946] pci 0000:01:00.0: reg 24: [io 0x3000-0x307f]
[ 0.404955] pci 0000:01:00.0: reg 30: [mem 0xfff80000-0xffffffff pref]
[ 0.406470] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.406475] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.406479] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
[ 0.406486] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.406578] pci 0000:02:00.0: [1969:1091] type 0 class 0x000200
[ 0.406606] pci 0000:02:00.0: reg 10: [mem 0xd3600000-0xd363ffff 64bit]
[ 0.406621] pci 0000:02:00.0: reg 18: [io 0x2000-0x207f]
[ 0.406750] pci 0000:02:00.0: PME# supported from D0 D1 D2 D3hot D3cold
[ 0.408474] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.408481] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.408488] pci 0000:00:1c.0: bridge window [mem 0xd3600000-0xd36fffff]
[ 0.408624] pci 0000:03:00.0: [8086:0891] type 0 class 0x000280
[ 0.408669] pci 0000:03:00.0: reg 10: [mem 0xd3500000-0xd3501fff 64bit]
[ 0.408896] pci 0000:03:00.0: PME# supported from D0 D3hot D3cold
[ 0.410499] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.410510] pci 0000:00:1c.1: bridge window [mem 0xd3500000-0xd35fffff]
[ 0.410600] pci 0000:04:00.0: [197b:2392] type 0 class 0x000880
[ 0.410627] pci 0000:04:00.0: reg 10: [mem 0xd3403000-0xd34030ff]
[ 0.410891] pci 0000:04:00.2: [197b:2391] type 0 class 0x000805
[ 0.410920] pci 0000:04:00.2: reg 10: [mem 0xd3402000-0xd34020ff]
[ 0.411175] pci 0000:04:00.3: [197b:2393] type 0 class 0x000880
[ 0.411203] pci 0000:04:00.3: reg 10: [mem 0xd3401000-0xd34010ff]
[ 0.411463] pci 0000:04:00.4: [197b:2394] type 0 class 0x000880
[ 0.411490] pci 0000:04:00.4: reg 10: [mem 0xd3400000-0xd34000ff]
[ 0.413473] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.413485] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd34fffff]
[ 0.413534] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0._PRT]
[ 0.413625] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP01._PRT]
[ 0.413647] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP02._PRT]
[ 0.413670] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.RP04._PRT]
[ 0.413711] ACPI: PCI Interrupt Routing Table [\_SB_.PCI0.PEG0._PRT]
[ 0.413775] \_SB_.PCI0:_OSC invalid UUID
[ 0.413776] _OSC request data:1 1f 1f
[ 0.413780] pci0000:00: Requesting ACPI _OSC control (0x1d)
[ 0.413813] \_SB_.PCI0:_OSC invalid UUID
[ 0.413814] _OSC request data:1 0 1d
[ 0.413817] pci0000:00: ACPI _OSC request failed (AE_ERROR), returned control mask: 0x1d
[ 0.413818] ACPI _OSC control for PCIe not granted, disabling ASPM
[ 0.416356] ACPI: PCI Interrupt Link [LNKA] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.416396] ACPI: PCI Interrupt Link [LNKB] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.416431] ACPI: PCI Interrupt Link [LNKC] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.416469] ACPI: PCI Interrupt Link [LNKD] (IRQs 1 3 4 5 6 *10 11 12 14 15)
[ 0.416504] ACPI: PCI Interrupt Link [LNKE] (IRQs 1 3 4 5 6 10 11 12 14 15) *0, disabled.
[ 0.416538] ACPI: PCI Interrupt Link [LNKF] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.416573] ACPI: PCI Interrupt Link [LNKG] (IRQs 1 3 4 5 6 10 11 12 14 15) *7
[ 0.416607] ACPI: PCI Interrupt Link [LNKH] (IRQs 1 3 4 5 6 10 *11 12 14 15)
[ 0.416677] vgaarb: device added: PCI:0000:00:02.0,decodes=io+mem,owns=io+mem,locks=none
[ 0.416683] vgaarb: device added: PCI:0000:01:00.0,decodes=io+mem,owns=none,locks=none
[ 0.416686] vgaarb: loaded
[ 0.416687] vgaarb: bridge control possible 0000:01:00.0
[ 0.416688] vgaarb: no bridge control possible 0000:00:02.0
[ 0.416733] SCSI subsystem initialized
[ 0.416761] libata version 3.00 loaded.
[ 0.416790] usbcore: registered new interface driver usbfs
[ 0.416796] usbcore: registered new interface driver hub
[ 0.416813] usbcore: registered new device driver usb
[ 0.416852] PCI: Using ACPI for IRQ routing
[ 0.418375] PCI: pci_cache_line_size set to 64 bytes
[ 0.418513] reserve RAM buffer: 000000000009d800 - 000000000009ffff
[ 0.418515] reserve RAM buffer: 0000000040004000 - 0000000043ffffff
[ 0.418517] reserve RAM buffer: 00000000baabf000 - 00000000bbffffff
[ 0.418519] reserve RAM buffer: 00000000bb000000 - 00000000bbffffff
[ 0.418520] reserve RAM buffer: 000000013f600000 - 000000013fffffff
[ 0.418590] NetLabel: Initializing
[ 0.418591] NetLabel: domain hash size = 128
[ 0.418592] NetLabel: protocols = UNLABELED CIPSOv4
[ 0.418600] NetLabel: unlabeled traffic allowed by default
[ 0.418613] hpet0: at MMIO 0xfed00000, IRQs 2, 8, 0, 0, 0, 0, 0, 0
[ 0.418618] hpet0: 8 comparators, 64-bit 14.318180 MHz counter
[ 0.421633] Switching to clocksource hpet
[ 0.426421] pnp: PnP ACPI init
[ 0.426434] ACPI: bus type pnp registered
[ 0.426694] pnp 00:00: [bus 00-3e]
[ 0.426696] pnp 00:00: [io 0x0000-0x0cf7 window]
[ 0.426698] pnp 00:00: [io 0x0cf8-0x0cff]
[ 0.426699] pnp 00:00: [io 0x0d00-0xffff window]
[ 0.426701] pnp 00:00: [mem 0x000a0000-0x000bffff window]
[ 0.426703] pnp 00:00: [mem 0x000c0000-0x000c3fff window]
[ 0.426706] pnp 00:00: [mem 0x000c4000-0x000c7fff window]
[ 0.426707] pnp 00:00: [mem 0x000c8000-0x000cbfff window]
[ 0.426709] pnp 00:00: [mem 0x000cc000-0x000cffff window]
[ 0.426710] pnp 00:00: [mem 0x000d0000-0x000d3fff window]
[ 0.426712] pnp 00:00: [mem 0x000d4000-0x000d7fff window]
[ 0.426713] pnp 00:00: [mem 0x000d8000-0x000dbfff window]
[ 0.426715] pnp 00:00: [mem 0x000dc000-0x000dffff window]
[ 0.426716] pnp 00:00: [mem 0x000e0000-0x000e3fff window]
[ 0.426718] pnp 00:00: [mem 0x000e4000-0x000e7fff window]
[ 0.426719] pnp 00:00: [mem 0x000e8000-0x000ebfff window]
[ 0.426721] pnp 00:00: [mem 0x000ec000-0x000effff window]
[ 0.426722] pnp 00:00: [mem 0x000f0000-0x000fffff window]
[ 0.426724] pnp 00:00: [mem 0xbfa00000-0xfeafffff window]
[ 0.426725] pnp 00:00: [mem 0x00010000-0x0001ffff window]
[ 0.426785] pnp 00:00: Plug and Play ACPI device, IDs PNP0a08 PNP0a03 (active)
[ 0.426795] pnp 00:01: [io 0x0000-0x001f]
[ 0.426797] pnp 00:01: [io 0x0081-0x0091]
[ 0.426798] pnp 00:01: [io 0x0093-0x009f]
[ 0.426799] pnp 00:01: [io 0x00c0-0x00df]
[ 0.426801] pnp 00:01: [dma 4]
[ 0.426815] pnp 00:01: Plug and Play ACPI device, IDs PNP0200 (active)
[ 0.426821] pnp 00:02: [mem 0xff010000-0xffffffff]
[ 0.426838] pnp 00:02: Plug and Play ACPI device, IDs INT0800 (active)
[ 0.426896] pnp 00:03: [mem 0xfed00000-0xfed003ff]
[ 0.426911] pnp 00:03: Plug and Play ACPI device, IDs PNP0103 (active)
[ 0.426918] pnp 00:04: [io 0x00f0]
[ 0.426926] pnp 00:04: [irq 13]
[ 0.426940] pnp 00:04: Plug and Play ACPI device, IDs PNP0c04 (active)
[ 0.426948] pnp 00:05: [io 0x002e-0x002f]
[ 0.426949] pnp 00:05: [io 0x004e-0x004f]
[ 0.426950] pnp 00:05: [io 0x0061]
[ 0.426951] pnp 00:05: [io 0x0063]
[ 0.426953] pnp 00:05: [io 0x0065]
[ 0.426954] pnp 00:05: [io 0x0067]
[ 0.426955] pnp 00:05: [io 0x0070]
[ 0.426956] pnp 00:05: [io 0x0080]
[ 0.426957] pnp 00:05: [io 0x0092]
[ 0.426959] pnp 00:05: [io 0x00b2-0x00b3]
[ 0.426960] pnp 00:05: [io 0x0680-0x069f]
[ 0.426961] pnp 00:05: [io 0x1100-0x110f]
[ 0.426962] pnp 00:05: [io 0xffff]
[ 0.426964] pnp 00:05: [io 0xffff]
[ 0.426965] pnp 00:05: [io 0x0400-0x0453]
[ 0.426966] pnp 00:05: [io 0x0458-0x047f]
[ 0.426967] pnp 00:05: [io 0x0500-0x057f]
[ 0.426969] pnp 00:05: [io 0x164e-0x164f]
[ 0.426970] pnp 00:05: [io 0xfd60-0xfd63]
[ 0.427007] system 00:05: [io 0x0680-0x069f] has been reserved
[ 0.427009] system 00:05: [io 0x1100-0x110f] has been reserved
[ 0.427010] system 00:05: [io 0xffff] has been reserved
[ 0.427012] system 00:05: [io 0xffff] has been reserved
[ 0.427014] system 00:05: [io 0x0400-0x0453] has been reserved
[ 0.427016] system 00:05: [io 0x0458-0x047f] has been reserved
[ 0.427017] system 00:05: [io 0x0500-0x057f] has been reserved
[ 0.427019] system 00:05: [io 0x164e-0x164f] has been reserved
[ 0.427021] system 00:05: [io 0xfd60-0xfd63] has been reserved
[ 0.427023] system 00:05: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.427031] pnp 00:06: [io 0x0070-0x0077]
[ 0.427036] pnp 00:06: [irq 8]
[ 0.427050] pnp 00:06: Plug and Play ACPI device, IDs PNP0b00 (active)
[ 0.427069] pnp 00:07: [io 0x0454-0x0457]
[ 0.427094] system 00:07: [io 0x0454-0x0457] has been reserved
[ 0.427096] system 00:07: Plug and Play ACPI device, IDs INT3f0d PNP0c02 (active)
[ 0.427104] pnp 00:08: [io 0x0060]
[ 0.427105] pnp 00:08: [io 0x0064]
[ 0.427110] pnp 00:08: [irq 1]
[ 0.427124] pnp 00:08: Plug and Play ACPI device, IDs PNP0303 (active)
[ 0.427168] pnp 00:09: [irq 12]
[ 0.427186] pnp 00:09: Plug and Play ACPI device, IDs SYN073d SYN0700 SYN0002 PNP0f13 (active)
[ 0.486720] pnp 00:0a: [mem 0xfed1c000-0xfed1ffff]
[ 0.486722] pnp 00:0a: [mem 0xfed10000-0xfed17fff]
[ 0.486723] pnp 00:0a: [mem 0xfed18000-0xfed18fff]
[ 0.486724] pnp 00:0a: [mem 0xfed19000-0xfed19fff]
[ 0.486726] pnp 00:0a: [mem 0xf0000000-0xf3ffffff]
[ 0.486727] pnp 00:0a: [mem 0xfed20000-0xfed3ffff]
[ 0.486729] pnp 00:0a: [mem 0xfed90000-0xfed93fff]
[ 0.486730] pnp 00:0a: [mem 0xff000000-0xff000fff]
[ 0.486731] pnp 00:0a: [mem 0xff010000-0xffffffff]
[ 0.486733] pnp 00:0a: [mem 0xfee00000-0xfeefffff]
[ 0.486734] pnp 00:0a: [mem 0xbfa00000-0xbfa00fff]
[ 0.486767] system 00:0a: [mem 0xfed1c000-0xfed1ffff] has been reserved
[ 0.486769] system 00:0a: [mem 0xfed10000-0xfed17fff] has been reserved
[ 0.486771] system 00:0a: [mem 0xfed18000-0xfed18fff] has been reserved
[ 0.486773] system 00:0a: [mem 0xfed19000-0xfed19fff] has been reserved
[ 0.486775] system 00:0a: [mem 0xf0000000-0xf3ffffff] has been reserved
[ 0.486777] system 00:0a: [mem 0xfed20000-0xfed3ffff] has been reserved
[ 0.486778] system 00:0a: [mem 0xfed90000-0xfed93fff] has been reserved
[ 0.486780] system 00:0a: [mem 0xff000000-0xff000fff] has been reserved
[ 0.486782] system 00:0a: [mem 0xff010000-0xffffffff] could not be reserved
[ 0.486784] system 00:0a: [mem 0xfee00000-0xfeefffff] could not be reserved
[ 0.486786] system 00:0a: [mem 0xbfa00000-0xbfa00fff] has been reserved
[ 0.486788] system 00:0a: Plug and Play ACPI device, IDs PNP0c02 (active)
[ 0.487055] pnp 00:0b: [mem 0x20000000-0x201fffff]
[ 0.487057] pnp 00:0b: [mem 0x40004000-0x40004fff]
[ 0.487096] system 00:0b: [mem 0x20000000-0x201fffff] has been reserved
[ 0.487098] system 00:0b: [mem 0x40004000-0x40004fff] has been reserved
[ 0.487100] system 00:0b: Plug and Play ACPI device, IDs PNP0c01 (active)
[ 0.487116] pnp: PnP ACPI: found 12 devices
[ 0.487117] ACPI: ACPI bus type pnp unregistered
[ 0.493358] pci 0000:01:00.0: no compatible bridge window for [mem 0xfff80000-0xffffffff pref]
[ 0.493363] PCI: max bus depth: 1 pci_try_num: 2
[ 0.493394] pci 0000:01:00.0: BAR 6: can't assign mem pref (size 0x80000)
[ 0.493396] pci 0000:00:01.0: PCI bridge to [bus 01-01]
[ 0.493398] pci 0000:00:01.0: bridge window [io 0x3000-0x3fff]
[ 0.493401] pci 0000:00:01.0: bridge window [mem 0xd2000000-0xd2ffffff]
[ 0.493403] pci 0000:00:01.0: bridge window [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.493407] pci 0000:00:1c.0: PCI bridge to [bus 02-02]
[ 0.493410] pci 0000:00:1c.0: bridge window [io 0x2000-0x2fff]
[ 0.493415] pci 0000:00:1c.0: bridge window [mem 0xd3600000-0xd36fffff]
[ 0.493423] pci 0000:00:1c.1: PCI bridge to [bus 03-03]
[ 0.493428] pci 0000:00:1c.1: bridge window [mem 0xd3500000-0xd35fffff]
[ 0.493436] pci 0000:00:1c.3: PCI bridge to [bus 04-04]
[ 0.493442] pci 0000:00:1c.3: bridge window [mem 0xd3400000-0xd34fffff]
[ 0.493480] pci_bus 0000:00: resource 4 [io 0x0000-0x0cf7]
[ 0.493481] pci_bus 0000:00: resource 5 [io 0x0d00-0xffff]
[ 0.493483] pci_bus 0000:00: resource 6 [mem 0x000a0000-0x000bffff]
[ 0.493485] pci_bus 0000:00: resource 7 [mem 0xbfa00000-0xfeafffff]
[ 0.493487] pci_bus 0000:01: resource 0 [io 0x3000-0x3fff]
[ 0.493488] pci_bus 0000:01: resource 1 [mem 0xd2000000-0xd2ffffff]
[ 0.493490] pci_bus 0000:01: resource 2 [mem 0xc0000000-0xd1ffffff 64bit pref]
[ 0.493492] pci_bus 0000:02: resource 0 [io 0x2000-0x2fff]
[ 0.493493] pci_bus 0000:02: resource 1 [mem 0xd3600000-0xd36fffff]
[ 0.493495] pci_bus 0000:03: resource 1 [mem 0xd3500000-0xd35fffff]
[ 0.493497] pci_bus 0000:04: resource 1 [mem 0xd3400000-0xd34fffff]
[ 0.493519] NET: Registered protocol family 2
[ 0.493638] IP route cache hash table entries: 131072 (order: 8, 1048576 bytes)
[ 0.494436] TCP established hash table entries: 524288 (order: 11, 8388608 bytes)
[ 0.495977] TCP bind hash table entries: 65536 (order: 8, 1048576 bytes)
[ 0.496166] TCP: Hash tables configured (established 524288 bind 65536)
[ 0.496168] TCP reno registered
[ 0.496177] UDP hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.496197] UDP-Lite hash table entries: 2048 (order: 4, 65536 bytes)
[ 0.496267] NET: Registered protocol family 1
[ 0.496279] pci 0000:00:02.0: Boot video device
[ 0.519661] PCI: CLS 64 bytes, default 64
[ 0.519698] Unpacking initramfs...
[ 0.767012] Freeing initrd memory: 16200k freed
[ 0.768937] PCI-DMA: Using software bounce buffering for IO (SWIOTLB)
[ 0.768940] Placing 64MB software IO TLB between ffff8800b6ab9000 - ffff8800baab9000
[ 0.768942] software IO TLB at phys 0xb6ab9000 - 0xbaab9000
[ 0.768956] Simple Boot Flag at 0x44 set to 0x1
[ 0.771380] alg: No test for __gcm-aes-aesni (__driver-gcm-aes-aesni)
[ 0.771595] audit: initializing netlink socket (disabled)
[ 0.771603] type=2000 audit(1347739416.594:1): initialized
[ 0.787748] HugeTLB registered 2 MB page size, pre-allocated 0 pages
[ 0.789066] VFS: Disk quotas dquot_6.5.2
[ 0.789096] Dquot-cache hash table entries: 512 (order 0, 4096 bytes)
[ 0.789413] msgmni has been set to 7710
[ 0.789451] SELinux: Registering netfilter hooks
[ 0.789811] alg: No test for stdrng (krng)
[ 0.789816] NET: Registered protocol family 38
[ 0.789847] Block layer SCSI generic (bsg) driver version 0.4 loaded (major 253)
[ 0.789867] io scheduler noop registered
[ 0.789870] io scheduler deadline registered
[ 0.789906] io scheduler cfq registered (default)
[ 0.789998] pcieport 0000:00:01.0: irq 40 for MSI/MSI-X
[ 0.790166] pci_hotplug: PCI Hot Plug PCI Core version: 0.5
[ 0.790179] pciehp: PCI Express Hot Plug Controller Driver version: 0.4
[ 0.790180] acpiphp: ACPI Hot Plug PCI Controller Driver version: 0.5
[ 0.790529] vesafb: mode is 1366x768x32, linelength=5504, pages=0
[ 0.790530] vesafb: scrolling: redraw
[ 0.790532] vesafb: Truecolor: size=8:8:8:8, shift=24:16:8:0
[ 0.791315] vesafb: framebuffer at 0xe0000000, mapped to 0xffffc90005100000, using 4160k, total 4160k
[ 0.791377] Console: switching to colour frame buffer device 170x48
[ 0.858539] fb0: VESA VGA frame buffer device
[ 0.858546] intel_idle: MWAIT substates: 0x21120
[ 0.858547] intel_idle: does not run on family 6 model 58
[ 0.858604] ACPI: AC Adapter [ACAD] (on-line)
[ 0.858678] input: Power Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0C:00/input/input0
[ 0.858682] ACPI: Power Button [PWRB]
[ 0.858707] input: Sleep Button as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:02/PNP0C0E:00/input/input1
[ 0.858710] ACPI: Sleep Button [SLPB]
[ 0.858743] input: Lid Switch as /devices/LNXSYSTM:00/device:00/PNP0C0D:00/input/input2
[ 0.858761] ACPI: Lid Switch [LID0]
[ 0.858785] input: Power Button as /devices/LNXSYSTM:00/LNXPWRBN:00/input/input3
[ 0.858788] ACPI: Power Button [PWRF]
[ 0.859209] Monitor-Mwait will be used to enter C-1 state
[ 0.859234] Monitor-Mwait will be used to enter C-2 state
[ 0.859246] ACPI: acpi_idle registered with cpuidle
[ 0.922373] thermal LNXTHERM:00: registered as thermal_zone0
[ 0.922375] ACPI: Thermal Zone [TZ00] (55 C)
[ 0.922407] GHES: HEST is not enabled!
[ 0.922478] Serial: 8250/16550 driver, 4 ports, IRQ sharing enabled
[ 1.121850] ACPI: Battery Slot [BAT1] (battery present)
[ 1.121969] Non-volatile memory driver v1.3
[ 1.121971] Linux agpgart interface v0.103
[ 1.122033] agpgart-intel 0000:00:00.0: Intel Ivybridge Chipset
[ 1.122144] agpgart-intel 0000:00:00.0: detected gtt size: 2097152K total, 262144K mappable
[ 1.123178] agpgart-intel 0000:00:00.0: detected 65536K stolen memory
[ 1.123275] agpgart-intel 0000:00:00.0: AGP aperture is 256M @ 0xe0000000
[ 1.123841] loop: module loaded
[ 1.123884] ahci 0000:00:1f.2: version 3.0
[ 1.123931] ahci 0000:00:1f.2: irq 41 for MSI/MSI-X
[ 1.123956] ahci: SSS flag set, parallel bus scan disabled
[ 1.134785] ahci 0000:00:1f.2: AHCI 0001.0300 32 slots 6 ports 6 Gbps 0x6 impl SATA mode
[ 1.134790] ahci 0000:00:1f.2: flags: 64bit ncq stag pm led clo pio slum part ems apst
[ 1.134798] ahci 0000:00:1f.2: setting latency timer to 64
[ 1.137101] scsi0 : ahci
[ 1.137160] scsi1 : ahci
[ 1.137209] scsi2 : ahci
[ 1.137255] scsi3 : ahci
[ 1.137302] scsi4 : ahci
[ 1.137348] scsi5 : ahci
[ 1.137475] ata1: DUMMY
[ 1.137478] ata2: SATA max UDMA/133 abar m2048@0xd3717000 port 0xd3717180 irq 41
[ 1.137482] ata3: SATA max UDMA/133 abar m2048@0xd3717000 port 0xd3717200 irq 41
[ 1.137483] ata4: DUMMY
[ 1.137484] ata5: DUMMY
[ 1.137485] ata6: DUMMY
[ 1.137556] Fixed MDIO Bus: probed
[ 1.137603] ehci_hcd: USB 2.0 'Enhanced' Host Controller (EHCI) Driver
[ 1.137625] ehci_hcd 0000:00:1a.0: setting latency timer to 64
[ 1.137629] ehci_hcd 0000:00:1a.0: EHCI Host Controller
[ 1.137663] ehci_hcd 0000:00:1a.0: new USB bus registered, assigned bus number 1
[ 1.137684] ehci_hcd 0000:00:1a.0: debug port 2
[ 1.141554] ehci_hcd 0000:00:1a.0: cache line size of 64 is not supported
[ 1.141568] ehci_hcd 0000:00:1a.0: irq 16, io mem 0xd3719000
[ 1.146755] ehci_hcd 0000:00:1a.0: USB 2.0 started, EHCI 1.00
[ 1.146781] usb usb1: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.146785] usb usb1: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.146788] usb usb1: Product: EHCI Host Controller
[ 1.146791] usb usb1: Manufacturer: Linux 3.3.4-5.fc17.x86_64 ehci_hcd
[ 1.146794] usb usb1: SerialNumber: 0000:00:1a.0
[ 1.146891] hub 1-0:1.0: USB hub found
[ 1.146894] hub 1-0:1.0: 2 ports detected
[ 1.146949] ehci_hcd 0000:00:1d.0: setting latency timer to 64
[ 1.146953] ehci_hcd 0000:00:1d.0: EHCI Host Controller
[ 1.146985] ehci_hcd 0000:00:1d.0: new USB bus registered, assigned bus number 2
[ 1.147005] ehci_hcd 0000:00:1d.0: debug port 2
[ 1.150880] ehci_hcd 0000:00:1d.0: cache line size of 64 is not supported
[ 1.150892] ehci_hcd 0000:00:1d.0: irq 23, io mem 0xd3718000
[ 1.156741] ehci_hcd 0000:00:1d.0: USB 2.0 started, EHCI 1.00
[ 1.156761] usb usb2: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.156765] usb usb2: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.156768] usb usb2: Product: EHCI Host Controller
[ 1.156771] usb usb2: Manufacturer: Linux 3.3.4-5.fc17.x86_64 ehci_hcd
[ 1.156774] usb usb2: SerialNumber: 0000:00:1d.0
[ 1.156861] hub 2-0:1.0: USB hub found
[ 1.156866] hub 2-0:1.0: 2 ports detected
[ 1.156904] ohci_hcd: USB 1.1 'Open' Host Controller (OHCI) Driver
[ 1.156912] uhci_hcd: USB Universal Host Controller Interface driver
[ 1.156952] xhci_hcd 0000:00:14.0: setting latency timer to 64
[ 1.156956] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.156991] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 3
[ 1.157074] xhci_hcd 0000:00:14.0: cache line size of 64 is not supported
[ 1.157086] xhci_hcd 0000:00:14.0: irq 21, io mem 0xd3700000
[ 1.157132] xhci_hcd 0000:00:14.0: irq 42 for MSI/MSI-X
[ 1.157171] usb usb3: New USB device found, idVendor=1d6b, idProduct=0002
[ 1.157173] usb usb3: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.157174] usb usb3: Product: xHCI Host Controller
[ 1.157175] usb usb3: Manufacturer: Linux 3.3.4-5.fc17.x86_64 xhci_hcd
[ 1.157177] usb usb3: SerialNumber: 0000:00:14.0
[ 1.157226] xHCI xhci_add_endpoint called for root hub
[ 1.157228] xHCI xhci_check_bandwidth called for root hub
[ 1.157246] hub 3-0:1.0: USB hub found
[ 1.157253] hub 3-0:1.0: 4 ports detected
[ 1.157292] xhci_hcd 0000:00:14.0: xHCI Host Controller
[ 1.157327] xhci_hcd 0000:00:14.0: new USB bus registered, assigned bus number 4
[ 1.157339] usb usb4: New USB device found, idVendor=1d6b, idProduct=0003
[ 1.157341] usb usb4: New USB device strings: Mfr=3, Product=2, SerialNumber=1
[ 1.157343] usb usb4: Product: xHCI Host Controller
[ 1.157344] usb usb4: Manufacturer: Linux 3.3.4-5.fc17.x86_64 xhci_hcd
[ 1.157345] usb usb4: SerialNumber: 0000:00:14.0
[ 1.157392] xHCI xhci_add_endpoint called for root hub
[ 1.157393] xHCI xhci_check_bandwidth called for root hub
[ 1.157408] hub 4-0:1.0: USB hub found
[ 1.157414] hub 4-0:1.0: 4 ports detected
[ 1.161776] usbcore: registered new interface driver usbserial
[ 1.161797] USB Serial support registered for generic
[ 1.161804] usbcore: registered new interface driver usbserial_generic
[ 1.161805] usbserial: USB Serial Driver core
[ 1.161831] i8042: PNP: PS/2 Controller [PNP0303:PS2K,PNP0f13:MSS1] at 0x60,0x64 irq 1,12
[ 1.203806] serio: i8042 KBD port at 0x60,0x64 irq 1
[ 1.203812] serio: i8042 AUX port at 0x60,0x64 irq 12
[ 1.203865] mousedev: PS/2 mouse device common for all mice
[ 1.206233] rtc_cmos 00:06: RTC can wake from S4
[ 1.206331] rtc_cmos 00:06: rtc core: registered rtc_cmos as rtc0
[ 1.206357] rtc0: alarms up to one month, 242 bytes nvram, hpet irqs
[ 1.206417] device-mapper: uevent: version 1.0.3
[ 1.206466] device-mapper: ioctl: 4.22.0-ioctl (2011-10-19) initialised: dm-devel@redhat.com
[ 1.206527] cpuidle: using governor ladder
[ 1.206573] cpuidle: using governor menu
[ 1.206750] EFI Variables Facility v0.08 2004-May-17
[ 1.206825] usbcore: registered new interface driver usbhid
[ 1.206826] usbhid: USB HID core driver
[ 1.206862] ip_tables: (C) 2000-2006 Netfilter Core Team
[ 1.206887] TCP cubic registered
[ 1.206890] Initializing XFRM netlink socket
[ 1.206971] NET: Registered protocol family 10
[ 1.207083] Mobile IPv6
[ 1.207085] NET: Registered protocol family 17
[ 1.207088] Registering the dns_resolver key type
[ 1.207388] PM: Hibernation image not present or could not be loaded.
[ 1.207401] registered taskstats version 1
[ 1.207901] Magic number: 12:779:93
[ 1.207986] rtc_cmos 00:06: setting system clock to 2012-09-15 20:03:37 UTC (1347739417)
[ 1.208612] Initializing network drop monitor service
[ 1.235296] input: AT Translated Set 2 keyboard as /devices/platform/i8042/serio0/input/input4
[ 1.442385] ata2: SATA link up 3.0 Gbps (SStatus 123 SControl 300)
[ 1.448808] ata2.00: failed to enable AA (error_mask=0x1)
[ 1.449846] ata2.00: ATA-8: ST1000LM024 HN-M101MBB, 2AR10001, max UDMA/100
[ 1.449851] ata2.00: 1953525168 sectors, multi 16: LBA48 NCQ (depth 31/32)
[ 1.450415] usb 1-1: new high-speed USB device number 2 using ehci_hcd
[ 1.456306] ata2.00: failed to enable AA (error_mask=0x1)
[ 1.457352] ata2.00: configured for UDMA/100
[ 1.457630] scsi 1:0:0:0: Direct-Access ATA ST1000LM024 HN-M 2AR1 PQ: 0 ANSI: 5
[ 1.457907] sd 1:0:0:0: Attached scsi generic sg0 type 0
[ 1.458038] sd 1:0:0:0: [sda] 1953525168 512-byte logical blocks: (1.00 TB/931 GiB)
[ 1.458045] sd 1:0:0:0: [sda] 4096-byte physical blocks
[ 1.458256] sd 1:0:0:0: [sda] Write Protect is off
[ 1.458261] sd 1:0:0:0: [sda] Mode Sense: 00 3a 00 00
[ 1.458305] sd 1:0:0:0: [sda] Write cache: enabled, read cache: enabled, doesn't support DPO or FUA
[ 1.564602] usb 1-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.564608] usb 1-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.565027] hub 1-1:1.0: USB hub found
[ 1.565233] hub 1-1:1.0: 6 ports detected
[ 1.668103] usb 2-1: new high-speed USB device number 2 using ehci_hcd
[ 1.686556] sda: sda1 sda2 < sda5 sda6 sda7 sda8 sda9 sda10 sda11 sda12 sda13 sda14 >
[ 1.688321] sd 1:0:0:0: [sda] Attached SCSI disk
[ 1.762016] ata3: SATA link up 1.5 Gbps (SStatus 113 SControl 300)
[ 1.765440] ata3.00: ATAPI: HL-DT-ST DVDRAM GT50N, LC01, max UDMA/33
[ 1.768404] ata3.00: configured for UDMA/33
[ 1.768977] Refined TSC clocksource calibration: 2494.333 MHz.
[ 1.768984] Switching to clocksource tsc
[ 1.772887] scsi 2:0:0:0: CD-ROM HL-DT-ST DVDRAM GT50N LC01 PQ: 0 ANSI: 5
[ 1.778298] sr0: scsi3-mmc drive: 24x/24x writer dvd-ram cd/rw xa/form2 cdda tray
[ 1.778304] cdrom: Uniform CD-ROM driver Revision: 3.20
[ 1.778538] sr 2:0:0:0: Attached scsi CD-ROM sr0
[ 1.778669] sr 2:0:0:0: Attached scsi generic sg1 type 5
[ 1.781523] Freeing unused kernel memory: 1000k freed
[ 1.781719] Write protecting the kernel read-only data: 10240k
[ 1.782090] Freeing unused kernel memory: 16k freed
[ 1.782284] usb 2-1: New USB device found, idVendor=8087, idProduct=0024
[ 1.782290] usb 2-1: New USB device strings: Mfr=0, Product=0, SerialNumber=0
[ 1.782594] hub 2-1:1.0: USB hub found
[ 1.782654] hub 2-1:1.0: 6 ports detected
[ 1.789409] Freeing unused kernel memory: 1516k freed
[ 1.860247] dracut: dracut-018-35.git20120510.fc17
[ 1.898811] dracut: rd.luks=0: removing cryptoluks activation
[ 1.910277] udevd[139]: starting version 182
[ 1.935752] usb 3-4: new low-speed USB device number 2 using xhci_hcd
[ 1.941493] [drm] Initialized drm 1.1.0 20060810
[ 1.942624] wmi: Mapper loaded
[ 1.948716] VGA switcheroo: detected Optimus DSM method \ handle
[ 1.948743] nouveau 0000:01:00.0: enabling device (0006 -> 0007)
[ 1.951013] [drm] nouveau 0000:01:00.0: Unsupported chipset 0x0e7140a2
[ 1.952117] nouveau: probe of 0000:01:00.0 failed with error -22
[ 1.953044] i915 0000:00:02.0: setting latency timer to 64
[ 1.996915] usb 3-4: New USB device found, idVendor=1bcf, idProduct=0002
[ 1.996917] usb 3-4: New USB device strings: Mfr=0, Product=2, SerialNumber=0
[ 1.996919] usb 3-4: Product: USB Optical Wheel Mouse
[ 1.996994] usb 3-4: ep 0x81 - rounding interval to 64 microframes, ep desc says 80 microframes
[ 2.000811] input: USB Optical Wheel Mouse as /devices/pci0000:00/0000:00:14.0/usb3/3-4/3-4:1.0/input/input5
[ 2.001018] generic-usb 0003:1BCF:0002.0001: input,hidraw0: USB HID v1.11 Mouse [USB Optical Wheel Mouse] on usb-0000:00:14.0-4/input0
[ 2.001371] i915 0000:00:02.0: irq 43 for MSI/MSI-X
[ 2.001387] [drm] Supports vblank timestamp caching Rev 1 (10.10.2010).
[ 2.001389] [drm] Driver supports precise vblank timestamp query.
[ 2.001524] [drm:intel_dsm_platform_mux_info] *ERROR* MUX INFO call failed
[ 2.002147] vgaarb: device changed decodes: PCI:0000:00:02.0,olddecodes=io+mem,decodes=none:owns=io+mem
[ 2.002149] vgaarb: transferring owner from PCI:0000:00:02.0 to PCI:0000:01:00.0
[ 2.075701] usb 1-1.6: new full-speed USB device number 3 using ehci_hcd
[ 2.164092] usb 1-1.6: New USB device found, idVendor=0489, idProduct=e042
[ 2.164098] usb 1-1.6: New USB device strings: Mfr=1, Product=2, SerialNumber=3
[ 2.164102] usb 1-1.6: Product: BCM20702A0
[ 2.164105] usb 1-1.6: Manufacturer: Broadcom Corp
[ 2.164107] usb 1-1.6: SerialNumber: 08EDB9D88B22
[ 2.237471] usb 2-1.6: new high-speed USB device number 3 using ehci_hcd
[ 2.392789] [drm] Enabling RC6 states: RC6 on, RC6p on, RC6pp off
[ 2.433689] usb 2-1.6: New USB device found, idVendor=13d3, idProduct=5162
[ 2.433696] usb 2-1.6: New USB device strings: Mfr=3, Product=1, SerialNumber=2
[ 2.433701] usb 2-1.6: Product: Lenovo EasyCamera
[ 2.433705] usb 2-1.6: Manufacturer: Azurewave
[ 2.433708] usb 2-1.6: SerialNumber: NULL
[ 2.519755] checking generic (e0000000 410000) vs hw (e0000000 10000000)
[ 2.519761] fb: conflicting fb hw usage inteldrmfb vs VESA VGA - removing generic driver
[ 2.519782] Console: switching to colour dummy device 80x25
[ 2.520951] fbcon: inteldrmfb (fb0) is primary device
[ 2.756261] Console: switching to colour frame buffer device 170x48
[ 2.761980] fb0: inteldrmfb frame buffer device
[ 2.761982] drm: registered panic notifier
[ 2.762271] [Firmware Bug]: ACPI(PEGP) defines _DOD but not _DOS
[ 2.770249] acpi device:3c: registered as cooling_device4
[ 2.770616] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/device:3a/LNXVIDEO:00/input/input6
[ 2.770717] ACPI: Video Device [PEGP] (multi-head: yes rom: yes post: no)
[ 2.781302] acpi device:48: registered as cooling_device5
[ 2.781700] input: Video Bus as /devices/LNXSYSTM:00/device:00/PNP0A08:00/LNXVIDEO:01/input/input7
[ 2.781772] ACPI: Video Device [GFX0] (multi-head: yes rom: no post: no)
[ 2.781806] [drm] Initialized i915 1.6.0 20080730 for 0000:00:02.0 on minor 0
[ 2.800654] psmouse serio1: synaptics: Touchpad model: 1, fw: 8.0, id: 0x1e2b1, caps: 0xd00123/0x840300/0x123c00
[ 2.816135] dracut: Starting plymouth daemon
[ 2.920755] input: SynPS/2 Synaptics TouchPad as /devices/platform/i8042/serio1/input/input8
[ 3.004593] dracut: rd.dm=0: removing DM RAID activation
[ 3.022998] dracut: rd.md=0: removing MD RAID activation
[ 3.179873] sdhci: Secure Digital Host Controller Interface driver
[ 3.179876] sdhci: Copyright(c) Pierre Ossman
[ 3.180100] sdhci-pci 0000:04:00.0: SDHCI controller found [197b:2392] (rev 30)
[ 3.180351] Registered led device: mmc0::
[ 3.182127] mmc0: SDHCI controller on PCI [0000:04:00.0] using DMA
[ 3.182152] sdhci-pci 0000:04:00.2: SDHCI controller found [197b:2391] (rev 30)
[ 3.182181] sdhci-pci 0000:04:00.2: Refusing to bind to secondary interface.
[ 5.881334] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 5.984999] dracut: Checking ext4: /dev/disk/by-uuid/ca374d0e-5956-4e76-9320-f0ac33475354
[ 5.985289] dracut: issuing e2fsck -a /dev/disk/by-uuid/ca374d0e-5956-4e76-9320-f0ac33475354
[ 6.058349] dracut: /dev/disk/by-uuid/ca374d0e-5956-4e76-9320-f0ac33475354: clean, 286164/1310720 files, 1892059/5242880 blocks
[ 6.058891] dracut: Remounting /dev/disk/by-uuid/ca374d0e-5956-4e76-9320-f0ac33475354 with -o ro
[ 6.091950] EXT4-fs (sda10): mounted filesystem with ordered data mode. Opts: (null)
[ 6.130046] dracut: Mounted root filesystem /dev/sda10
[ 6.548231] dracut: Switching root
[ 7.085837] type=1404 audit(1347739423.384:2): enforcing=1 old_enforcing=0 auid=4294967295 ses=4294967295
[ 7.298938] SELinux: 2048 avtab hash slots, 99000 rules.
[ 7.309955] SELinux: 2048 avtab hash slots, 99000 rules.
[ 7.389058] SELinux: 9 users, 15 roles, 4112 types, 222 bools, 1 sens, 1024 cats
[ 7.389061] SELinux: 83 classes, 99000 rules
[ 7.391686] SELinux: Permission ptrace_child in class process not defined in policy.
[ 7.391751] SELinux: the above unknown classes and permissions will be allowed
[ 7.391756] SELinux: Completing initialization.
[ 7.391757] SELinux: Setting up existing superblocks.
[ 7.391768] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 7.391772] SELinux: initialized (dev rootfs, type rootfs), uses genfs_contexts
[ 7.391780] SELinux: initialized (dev bdev, type bdev), uses genfs_contexts
[ 7.391785] SELinux: initialized (dev proc, type proc), uses genfs_contexts
[ 7.391790] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.391810] SELinux: initialized (dev devtmpfs, type devtmpfs), uses transition SIDs
[ 7.392170] SELinux: initialized (dev sockfs, type sockfs), uses task SIDs
[ 7.392174] SELinux: initialized (dev debugfs, type debugfs), uses genfs_contexts
[ 7.392569] SELinux: initialized (dev pipefs, type pipefs), uses task SIDs
[ 7.392573] SELinux: initialized (dev anon_inodefs, type anon_inodefs), uses genfs_contexts
[ 7.392575] SELinux: initialized (dev devpts, type devpts), uses transition SIDs
[ 7.392584] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 7.392588] SELinux: initialized (dev mqueue, type mqueue), uses transition SIDs
[ 7.392594] SELinux: initialized (dev selinuxfs, type selinuxfs), uses genfs_contexts
[ 7.392600] SELinux: initialized (dev sysfs, type sysfs), uses genfs_contexts
[ 7.392851] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.392856] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.392875] SELinux: initialized (dev sda10, type ext4), uses xattr
[ 7.419793] type=1403 audit(1347739423.718:3): policy loaded auid=4294967295 ses=4294967295
[ 7.532842] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 7.537565] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.604466] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.612460] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.620461] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.628414] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.636398] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.648398] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.656404] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 7.664372] SELinux: initialized (dev cgroup, type cgroup), uses genfs_contexts
[ 8.705654] SELinux: initialized (dev autofs, type autofs), uses genfs_contexts
[ 10.036980] SELinux: initialized (dev tmpfs, type tmpfs), uses transition SIDs
[ 10.037421] SELinux: initialized (dev configfs, type configfs), uses genfs_contexts
[ 10.037554] SELinux: initialized (dev hugetlbfs, type hugetlbfs), uses transition SIDs
[ 10.038641] SELinux: initialized (dev securityfs, type securityfs), uses genfs_contexts
[ 10.180493] EXT4-fs (sda10): re-mounted. Opts: (null)
[ 10.414813] udevd[368]: starting version 182
[ 13.147760] input: Ideapad extra buttons as /devices/platform/ideapad/input/input9
[ 13.173145] microcode: CPU0 sig=0x306a9, pf=0x10, revision=0x12
[ 13.286853] microcode: CPU1 sig=0x306a9, pf=0x10, revision=0x12
[ 13.287403] iTCO_vendor_support: vendor-support=0
[ 13.287620] iTCO_wdt: Intel TCO WatchDog Timer Driver v1.07
[ 13.287678] iTCO_wdt: Found a Panther Point TCO device (Version=2, TCOBASE=0x0460)
[ 13.287803] iTCO_wdt: initialized. heartbeat=30 sec (nowayout=0)
[ 13.288441] cfg80211: Calling CRDA to update world regulatory domain
[ 13.289428] microcode: CPU2 sig=0x306a9, pf=0x10, revision=0x12
[ 13.291059] microcode: CPU3 sig=0x306a9, pf=0x10, revision=0x12
[ 13.291564] microcode: Microcode Update Driver: v2.00 <tigran@aivazian.fsnet.co.uk>, Peter Oruba
[ 13.292377] Intel(R) Wireless WiFi Link AGN driver for Linux, in-tree:d
[ 13.292380] Copyright(c) 2003-2011 Intel Corporation
[ 13.292508] iwlwifi 0000:03:00.0: pci_resource_len = 0x00002000
[ 13.292510] iwlwifi 0000:03:00.0: pci_resource_base = ffffc900050e8000
[ 13.292512] iwlwifi 0000:03:00.0: HW Revision ID = 0xC4
[ 13.292651] iwlwifi 0000:03:00.0: irq 44 for MSI/MSI-X
[ 13.292713] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUG enabled
[ 13.292715] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEBUGFS enabled
[ 13.292717] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TRACING disabled
[ 13.292718] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_DEVICE_TESTMODE disabled
[ 13.292720] iwlwifi 0000:03:00.0: CONFIG_IWLWIFI_P2P disabled
[ 13.292749] iwlwifi 0000:03:00.0: Detected Intel(R) Centrino(R) Wireless-N 2200 BGN, REV=0x104
[ 13.292861] iwlwifi 0000:03:00.0: L1 Enabled; Disabling L0S
[ 13.311251] iwlwifi 0000:03:00.0: device EEPROM VER=0x81c, CALIB=0x6
[ 13.311253] iwlwifi 0000:03:00.0: Device SKU: 0x150
[ 13.311255] iwlwifi 0000:03:00.0: Valid Tx ant: 0x3, Valid Rx ant: 0x3
[ 13.311268] iwlwifi 0000:03:00.0: Tunable channels: 13 802.11bg, 0 802.11a channels
[ 13.312174] iwlwifi 0000:03:00.0: request for firmware file 'iwlwifi-2000-5.ucode' failed.
[ 13.312178] iwlwifi 0000:03:00.0: no suitable firmware found!
[ 13.314767] ACPI Warning: 0x0000000000004040-0x000000000000405f SystemIO conflicts with Region \_SB_.PCI0.SBUS.SMBI 1 (20120111/utaddress-251)
[ 13.314772] ACPI: If an ACPI driver is available for this device, you should use it instead of the native driver
[ 14.167096] snd_hda_intel 0000:00:1b.0: irq 44 for MSI/MSI-X
[ 14.367026] Linux media interface: v0.10
[ 14.367687] Linux video capture interface: v2.00
[ 14.368484] uvcvideo: Found UVC 1.00 device Lenovo EasyCamera (13d3:5162)
[ 14.374526] input: Lenovo EasyCamera as /devices/pci0000:00/0000:00:1d.0/usb2/2-1/2-1.6/2-1.6:1.0/input/input10
[ 14.374581] usbcore: registered new interface driver uvcvideo
[ 14.374582] USB Video Class driver (1.1.1)
[ 14.503250] cfg80211: World regulatory domain updated:
[ 14.503252] cfg80211: (start_freq - end_freq @ bandwidth), (max_antenna_gain, max_eirp)
[ 14.503254] cfg80211: (2402000 KHz - 2472000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.503255] cfg80211: (2457000 KHz - 2482000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.503257] cfg80211: (2474000 KHz - 2494000 KHz @ 20000 KHz), (300 mBi, 2000 mBm)
[ 14.503258] cfg80211: (5170000 KHz - 5250000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.503259] cfg80211: (5735000 KHz - 5835000 KHz @ 40000 KHz), (300 mBi, 2000 mBm)
[ 14.684762] ALSA sound/pci/hda/patch_realtek.c:1253 SKU: Nid=0x1d sku_cfg=0x4015822d
[ 14.684766] ALSA sound/pci/hda/patch_realtek.c:1255 SKU: port_connectivity=0x1
[ 14.684778] ALSA sound/pci/hda/patch_realtek.c:1256 SKU: enable_pcbeep=0x1
[ 14.684784] ALSA sound/pci/hda/patch_realtek.c:1257 SKU: check_sum=0x00000005
[ 14.684789] ALSA sound/pci/hda/patch_realtek.c:1258 SKU: customization=0x00000082
[ 14.684793] ALSA sound/pci/hda/patch_realtek.c:1259 SKU: external_amp=0x5
[ 14.684799] ALSA sound/pci/hda/patch_realtek.c:1260 SKU: platform_type=0x1
[ 14.684804] ALSA sound/pci/hda/patch_realtek.c:1261 SKU: swap=0x0
[ 14.684809] ALSA sound/pci/hda/patch_realtek.c:1262 SKU: override=0x1
[ 14.684890] ALSA sound/pci/hda/hda_codec.c:4927 autoconfig: line_outs=1 (0x14/0x0/0x0/0x0/0x0) type:speaker
[ 14.684897] ALSA sound/pci/hda/hda_codec.c:4931 speaker_outs=0 (0x0/0x0/0x0/0x0/0x0)
[ 14.684903] ALSA sound/pci/hda/hda_codec.c:4935 hp_outs=1 (0x15/0x0/0x0/0x0/0x0)
[ 14.684908] ALSA sound/pci/hda/hda_codec.c:4936 mono: mono_out=0x0
[ 14.684914] ALSA sound/pci/hda/hda_codec.c:4939 dig-out=0x1e/0x0
[ 14.684917] ALSA sound/pci/hda/hda_codec.c:4940 inputs:
[ 14.684922] ALSA sound/pci/hda/hda_codec.c:4944 Internal Mic=0x12
[ 14.684926] ALSA sound/pci/hda/hda_codec.c:4944 Mic=0x18
[ 14.684928] ALSA sound/pci/hda/hda_codec.c:4946
[ 14.686297] ALSA sound/pci/hda/patch_realtek.c:1316 realtek: No valid SSID, checking pincfg 0x4015822d for NID 0x1d
[ 14.686302] ALSA sound/pci/hda/patch_realtek.c:1332 realtek: Enabling init ASM_ID=0x822d CODEC_ID=10ec0269
[ 14.694823] HDMI status: Codec=3 Pin=5 Presence_Detect=0 ELD_Valid=0
[ 14.694888] input: HDA Intel PCH HDMI/DP,pcm=3 as /devices/pci0000:00/0000:00:1b.0/sound/card0/input11
[ 14.695050] input: HDA Intel PCH Mic as /devices/pci0000:00/0000:00:1b.0/sound/card0/input12
[ 14.695143] input: HDA Intel PCH Headphone as /devices/pci0000:00/0000:00:1b.0/sound/card0/input13
[ 19.486179] Adding 2097148k swap on /dev/sda11. Priority:0 extents:1 across:2097148k
[ 26.449673] EXT4-fs (sda12): mounted filesystem with ordered data mode. Opts: (null)
[ 26.449685] SELinux: initialized (dev sda12, type ext4), uses xattr
[ 26.895847] EXT4-fs (sda13): mounted filesystem with ordered data mode. Opts: (null)
[ 26.895854] SELinux: initialized (dev sda13, type ext4), uses xattr
[ 27.325543] EXT4-fs (sda9): mounting ext3 file system using the ext4 subsystem
[ 27.337605] EXT4-fs (sda9): mounted filesystem with ordered data mode. Opts: (null)
[ 27.599827] SELinux: initialized (dev sda9, type ext3), uses xattr
[ 27.886420] EXT4-fs (sda14): mounted filesystem with ordered data mode. Opts: (null)
[ 27.886426] SELinux: initialized (dev sda14, type ext4), uses xattr
[ 28.924567] ip6_tables: (C) 2000-2006 Netfilter Core Team
[ 29.036952] nf_conntrack version 0.5.0 (16384 buckets, 65536 max)
[ 31.541145] Bluetooth: Core ver 2.16
[ 31.541242] NET: Registered protocol family 31
[ 31.541245] Bluetooth: HCI device and connection manager initialized
[ 31.541249] Bluetooth: HCI socket layer initialized
[ 31.541252] Bluetooth: L2CAP socket layer initialized
[ 31.541259] Bluetooth: SCO socket layer initialized
[ 31.580754] Bluetooth: BNEP (Ethernet Emulation) ver 1.3
[ 31.580756] Bluetooth: BNEP filters: protocol multicast
[ 37.801266] CPU0: Package power limit notification (total events = 1)
[ 37.801275] CPU2: Package power limit notification (total events = 1)
[ 37.801282] CPU3: Package power limit notification (total events = 1)
[ 37.801304] CPU1: Package power limit notification (total events = 1)
[ 37.801319] CPU2: Package power limit normal
[ 37.801323] CPU0: Package power limit normal
[ 37.801328] CPU3: Package power limit normal
[ 37.801332] CPU1: Package power limit normal
[ 40.107215] fuse init (API version 7.18)
[ 40.110472] SELinux: initialized (dev fuse, type fuse), uses genfs_contexts
[ 40.131259] SELinux: initialized (dev fusectl, type fusectl), uses genfs_contexts
[ 62.233084] RPC: Registered named UNIX socket transport module.
[ 62.233087] RPC: Registered udp transport module.
[ 62.233088] RPC: Registered tcp transport module.
[ 62.233090] RPC: Registered tcp NFSv4.1 backchannel transport module.
[ 78.030363] SELinux: initialized (dev sda6, type fuseblk), uses genfs_contexts
[ 337.501620] CPU1: Package power limit normal
[ 337.501626] CPU0: Package power limit normal
[ 337.501633] CPU2: Package power limit normal
[ 337.501639] CPU3: Package power limit normal
--------------------------------------------------------------------------------------------------------------
alick 于 2012-09-16 01:40:00发表:
gnome-terminal虚拟终端可以选中右键复制，之后粘贴出来的。
dmesg 的输出可以考虑先重定向到一个文件中，然后打开之，复制粘贴：[code]dmesg > dmesg.txt[/code]
jessiehe1986 于 2012-09-15 14:12:27发表:
谢谢了，和国内有时差，现在是临晨4点了，暂时我不能用机器，稍后会贴上来。
我在终端输入这两段，然后把输出贴出来就行了吧，如果输出很长的话，有什么办法把终端里的输出信息复制成文本呢？我上面的信息都是截图哦。。
alick 于 2012-09-15 11:44:28发表:
我建议楼主把如下两个命令的输出贴出来，以诊断问题：
检查网卡信息：[code]for BUSID in $(/sbin/lspci | awk '{ IGNORECASE=1 } /net/ { print $1 }'); do /sbin/lspci -s $BUSID -knn; done[/code]dmesg 输出（会很长，但不太好过滤所以全贴出来吧）：[code]dmesg[/code]
jessiehe1986 于 2012-09-15 10:58:08发表:
请问版主，我还有个办法是安装无线网卡驱动，因为网上Fedora出问题的都是无线驱动方面，我的无线网卡是“Intel 2200 BGN”, 请问我有什么办法在离线的情况下安装无线网卡驱动吗？下载地址我已经能找到了，要下载一个什么样的东西到电脑的什么位置，然后如何安装呢？我刚开始学，水平太差了～～麻烦各位了～～
jessiehe1986 于 2012-09-15 08:40:55发表:
我的是Lenova Y580-IFI, 所谓的网卡驱动就是1000mbs 以太网吧。这个也需要驱动吗？
alick 于 2012-09-14 23:54:05发表:
很可能，用下面的命令测试一下：[code]lspci | grep -i eth[/code]如果没有输出结果，那么可以肯定是以太网卡没有识别。如果的确是以太网卡不识别的话，需要确定网卡型号，寻找驱动。
jessiehe1986 于 2012-09-14 12:18:44发表:
拜一拜，明天来看答案哈。。