简单几步,让你用ADSL上网 FreeBSD ADSL 安装Go!Go!Go!
1.配置网络连接
先登录系统，这样：
Login: root (以Root用户登录)
Password: (输入你的密码，因安全问题，这里你看不到输入的结果.)[code]#################################################################
# PPP Sample Configuration File
# Originally written by Toshiharu OHNO
#
# See /usr/share/examples/ppp/ for some examples
#
#################################################################
default:
set log Phase Chat LCP IPCP CCP tun command
ident user-ppp VERSION (built COMPILATIONDATE)
# Ensure that "device" references the correct serial port
# for your modem. (cuaa0 = COM1, cuaa1 = COM2)
#
set device PPPoE:lnc0
set speed sync
set mru 1492
set mtu 1492
set ctsrts off
set timeout 30 # 3 minute idle timer (the default)
disable lqr
deny lqr
add default HISADDR
hz163: # 注意:这里的hz163是你的ISP名,要比下面的set语句多出一点(一个空格).
set authname user(把这里的user换成你的ADSL用户名)
set authkey password (把这里的password换成你的ADSL密码)
set dial
set login
set ifaddr 10.0.0.1/0 10.0.0.2/0
nat enable yes[/code]连接网络[code]#ppp -ddial hz163[/code]之后看看连接状态。[code]#ifconfig[/code]我的结果：[code]lnc0: flags=8843 mtu 1500
inet 192.168.0.254 netmask 0xffffff00 broadcast 192.168.0.255
inet6 fe80::20c:29ff:fe98:25a6%lnc0 prefixlen 64 scopeid 0x1 ether 00:0c:29:98:25:a6
lp0: flags=8810 mtu 1500
lo0: flags=8049 mtu 16384
inet6 ::1 prefixlen 128
inet6 fe80::1%lo0 prefixlen 64 scopeid 0x3
inet 127.0.0.1 netmask 0xff000000
ppp0: flags=8010 mtu 1500
sl0: flags=c010 mtu 552
faith0: flags=8002 mtu 1500
tun0: flags=8051 mtu 1492
inet 218.72.106.94 --> 61.174.64.21 netmask 0xffffffff
Opened by PID 54[/code]inet后的数字部分就是：ISP分的IP地址 -> ISP的DNS服务器的IP. 这样你就上了网啦！[code]ifconfig_lnc0="192.168.0.254/24"
defaultrouter="192.168.0.254"
inetd_enable="yes"
gateway_enable="yes"
ppp_enable="yes"
ppp_mode="ddial"
ppp_nat="yes"
ppp_profile="hz163"
named_enable="yes"[/code]这几句就把FreeBSD虚拟机配置成了一NAT网关，兼软路由、BIND8名字服务器。
简单吧??
嘿嘿!!!!
